Website Cambro Manufacturing
WORK SHIFT:
Second Shift (United States of America)
JOB DESCRIPTION:
The Mold Tech III (Injection Mold Maintenance & Repair) is responsible for all duties listed below, follows all work processes implemented in the department and follows all Safety and Company guidelines as outlined in the department manuals.
ESSENTIAL JOB FUNCTIONS
-
In-House Injection Mold Repair, preventative maintenance, troubleshooting, insert change over, disassemble, clean, minor polishing and reassemble of Injection Molds
-
Repair molds with minimal supervision
-
Read and understand engineering documents
-
Ability to handle mold safely to ensure safety of personnel, equipment, and tooling
-
Ability to meet deadlines and efficient routing of job through shop in a timely manner
-
Aid in the production areas as needed to perform mold functionality/ repairs & possible processing troubleshooting
-
Ability to foresee tooling problems and suggest solutions
-
Attending to projects/assignments as directed by your Supervisor, Manager or Engineer
-
Ability to make work independently as well as with others as a team
-
Additional job duties as assigned
-
Ability to read and comprehend blueprints and detailed mold/tool drawings and written/verbal instructions so as to perform the work required
-
Ability to have basic computer skills such as keyboard, mouse and data entry etc.;
-
Inspect, analyze and determine mold needs, verifying dimensions using micrometers, gauge, dial indicators and other related precision instruments
-
Dismantle mold to perform required work
-
Extensive knowledge to operate various tools such as milling machines, lathes, grinders, drill presses, etc.
-
Observe and adhere to all company policies and procedures
-
Ability to operate a forklift and overhead hoist
-
Knowledge in in hot runner manifold systems and wiring of related components
-
Enter mold maintenance performed into in house electronic computer tracking system
-
Maintain reliable and consistent attendance, including being punctual, and dependable in order to meet the needs of the department and the organization.
-
Execute each essential duty satisfactorily in order to perform job successfully.
-
Follows all safety procedures required in work area, wears PPE as needed, attends all safety meetings, and reports safety issues regarding equipment or unsafe/hazardous conditions.
-
Performs effectively as a team member, able to work well with others, open to receive and give feedback, and treats everyone with respect.
-
Takes ownership of own work and behavior, accepts accountability for own actions, encourages solutions, and communicates status of work/projects.
-
Follow all department quality standards/criteria. Raise concerns and issues to immediate manager.
-
Able to understand and demonstrate Cambro company culture, display company core values (Safety, Quality, Respect, and Service).
-
Understands department’s key performance indicators and contributes to achieve these goals both individually and as a team.
-
Other duties as needed or required.
ADDITIONAL RESPONSIBILITIES
-
Must be able to work overtime as needed, remain flexible and open to possible schedule changes in order to meet business needs.
REQUIRED QUALIFICATIONS
The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
-
Five (5) to ten (10) years in Injection Mold maintenance and troubleshooting
-
High School diploma or GED required; Associate Degree desired
-
Ability to read and interpret documents such as safety rules, operating/maintenance instructions, and procedure manuals
-
Ability to perform math functions
-
Basic understanding of hardness principles and appropriate application of steels
-
Geometry and Trigonometry skills as related to conversion of part drawings into molds
-
Must meet CAMBRO’s Fork-Lift Certification Requirements
-
Valid California driver’s license with not more than two (2) moving violations within the past three (3) years.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Sitting, walking, standing, bending at the neck, bending at the waist, squatting, climbing, kneeling, crawling, twisting at the neck and waist, repetitive use of hands, simple grasping, power grasping, fine manipulation, pushing and pulling, reaching above and below the shoulder, carrying/lifting up to 50 lbs.
-
Driving cars, trucks, forklifts and other equipment
-
Working around equipment and machinery
-
Exposure to excessive noise
-
Exposure to dust, gas, fumes or chemicals
-
Working at heights
-
Use of special visual or auditory protective equipment
-
Walking on uneven ground
-
Operation of foot controls or repetitive foot movement
-
Risk of exposure to bio-hazard while working such as: bloodborne pathogens, sewage, hospital waste, etc.
PPE REQUIREMENTS
-
Safety glasses
-
Utility gloves
-
Steel-toe slip-resistant shoes
-
Hardhat
-
Hearing protection (e.g. ear plugs, ear muffs)
-
Face shields
-
Face covering (mask) in accordance with company policy.
Mold Tech
COMPENSATION RANGE:
$27.53 – $32.00
Salary may vary based on experience.
CAMBRO is proud to be an equal-opportunity workplace. All qualified applicants will receive consideration for employment without regard to and will not be discriminated against based upon race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic information, military or veteran status, or other characteristics protected by law.
What this job looks like in the OC market
Pay check. This job lists about $61,911 a year (the midpoint of its posted range). That's close to the $63,440 median for Other jobs posted in Orange County right now.
About Huntington Beach. About 8,679 OCEAN professionals live or work in Huntington Beach. 46.5% are VP level or above, and the biggest industry is marketing and advertising. There are 274 open jobs in Huntington Beach on the board today. See all Huntington Beach jobs.
More at Cambro Manufacturing. Cambro Manufacturing has 46 open jobs in Orange County, #40 of 404 employers on the board. Other openings: Process Technician II · ERP Project Manager · TEMP to F/T – Production Machine Operator I · Production Machine Operator I. See Cambro Manufacturing's hiring profile.
Meet people who hire here. A lot of OC hires still start with an introduction. OCEAN's monthly networking mixers and its free OCEAN Connect introductions put you in the room with people at companies like this one.
OCEAN Job Board data, updated daily from live postings. Member figures come from OCEAN's State of OC Business Networking 2026 report and are city-level totals only. How our data works.
Apply for this Job
This employer takes applications on their own website. The button opens it in a new tab.
Apply on Cambro Manufacturing's Site →Similar Jobs
Similar Jobs
Get Jobs Like This by Email
Working in Huntington Beach
Huntington Beach is known for the beach, but the job market here is bigger than tourism. Boeing has a long-running campus in the city focused on space and defense work, and the industrial areas near Bolsa, Gothard, and the 405 hold hundreds of manufacturers, machine shops, and distributors. That makes HB one of the better OC cities for engineering, skilled trades, and production roles.
Before You Apply
Apply through the button above, and keep your resume tailored to the keywords in the posting. Check the posted pay range against similar Orange County roles, and look up the drive time at rush hour before you commit. Want an edge? OCEAN has been connecting Orange County professionals since 2007, and a conversation at an OCEAN mixer can put you in front of the people who hire.
Keep looking: All jobs in Huntington Beach · Career advice