Website Cambro Manufacturing
WORK SHIFT:
Third Shift (United States of America)
JOB DESCRIPTION:
The Utility Worker is responsible for maintaining workplace organization, cleanliness, and operational readiness throughout the Injection Molding and Automation Departments. This position supports production efficiency through 5S activities, waste removal, machine area inspections, quality monitoring, and general housekeeping. The Utility Worker plays a critical role in ensuring a safe, organized, and visually managed manufacturing environment while supporting continuous improvement initiatives.
ESSENTIAL JOB FUNCTIONS
5S and Housekeeping
• Perform daily audits of production areas to ensure compliance with 5S standards.
• Verify all cleaning stations are fully stocked, organized, and maintained on each shift.
• Maintain clean and orderly work areas throughout the manufacturing facility.
• Remove cardboard trimmings, plastic dust, strap debris, and other housekeeping-related waste.
• Ensure designated future automation areas remain clean, organized, and free from unnecessary WIP, Hold material, and obsolete inventory.
• Support continuous improvement efforts that promote workplace organization and safety.
• Assist with 5S on equipment maintenance. Maintain a scheduled 5S program for EOAT end-of-arm tools, mold equipment, and knockout bars. Production Area Support
• Verify all molding machines have properly labeled reject bins in place.
• Complete routine inspections using standardized reject bin checklists.
• Verify all molding machines have designated and labeled trash receptacles for label backing and related waste.
• Monitor work areas for compliance with established visual management standards.
• Ensure sprues are properly contained and captured to prevent floor contamination and trip hazards.
• Identify and report production area conditions that may create safety concerns.
• Ensure molding machine areas are clean and free of debris following setups and mold changes.
• Assist Technicians with removal of purge material, startup scrap, and other setup debris as needed.
• Assist Technicians in ensuring machines are left in a clean and organized condition before production begins.
• Provides timely feedback regarding observations of policy and/or procedure violations.
• Walks through the facility to verify status and visually checks for facility and/or equipment damage at the beginning and end of work day.
• Conduct routine visual inspections of molding operations.
• Monitor with machine output for excessive flash, gate-related defects, or other obvious quality concerns.
• Notify production personnel and supervisors of any out-of-specification conditions identified during inspections.
• Support containment activities as directed by supervision.
• Remove trash and recyclables from designated production areas.
• Assist with waste removal activities within the Composites Department as required
• Transport collected scrap and waste materials to approved disposal or recycling locations.
• Maintain cleanliness around scrap collection and disposal stations.
• Able to understand and demonstrate Cambro company culture, display company core values (Safety, Quality, Respect, and Service).
• Maintains reliable and consistent attendance, including being punctual, dependable, and flexible to potential schedule changes to meet the needs of the department and the organization.
• Executes each essential duty satisfactorily to perform job successfully.
• Follows all safety procedures required in work area, wears PPE as needed, attends all safety meetings, and reports safety issues regarding equipment or unsafe/hazardous conditions.
• Performs effectively as a team member, able to work well with others, open to receiving and giving feedback, and treats everyone with respect.
• Takes ownership of own work and behavior, accepts accountability for own actions, encourages solutions, and communicates status of work/projects.
• Follows all department quality standards/criteria. Raises concerns and issues to management.
• Understands department’s key performance indicators (KPIs) and contributes to achieving these goals both individually and as a team.
• Other duties as needed or required.
ADDITIONAL RESPONSIBILITIES
• Report equipment abnormalities and safety concerns requiring maintenance attention.
• May also be required to perform the duties of packaging personnel if needed to support production department therefore should know the pre-required duties, responsibilities and skills of that position.
• Must be able to work overtime as needed, remain flexible and open to schedule changes to meet business needs.
REQUIRED QUALIFICATIONS
The requirements listed below are representative of the knowledge, skills, and/or ability required. Reasonable accommodation(s) may be made to enable individuals with disabilities to perform the essential functions.
• High school diploma or general education degree (GED); and one to three years related experience and/or training; or equivalent combination of education and experience.
• Ability to communicate well in English, both verbally and in writing. Complete reports and comprehend instructions. Speak effectively in front of groups of people, coworkers.
• Ability to read and interpret documents such as safety rules and procedure manuals.
• Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs.
• Excellent interpersonal skills to deal with difficult situations; find resolutions, escalate and communicate situations to Shift Manager.
• Must have completed 5S training and/or a 5S/lean manufacturing certificate.
PREFERRED QUALIFICATIONS
• Working knowledge of our Manufacturing operating systems (Mattec).
• Bilingual in Spanish.
• Forklift Certification
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation(s) may be made to enable individuals with disabilities to perform the essential functions.
Sitting, walking, standing, bending at the neck, bending at the waist, squatting, twisting at the neck and waist, repetitive use of hands, simple grasping, power grasping, fine manipulation, pushing and pulling, reaching above and below the shoulder, carrying/lifting up to 25-50 lbs.
- Driving cars, trucks, forklifts and other equipment
- Working around equipment and machinery
- Exposure to excessive noise
- Exposure to dust, gas, fumes or chemicals
PPE REQUIREMENTS
- Safety glasses
- Utility gloves
- Steel-toe slip-resistant shoes
- Hearing protection (e.g. ear plugs, ear muffs)
COMPENSATION RANGE:
$18.14 – $18.14
Salary may vary based on experience.
CAMBRO is proud to be an equal-opportunity workplace. All qualified applicants will receive consideration for employment without regard to and will not be discriminated against based upon race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic information, military or veteran status, or other characteristics protected by law. Applicants must be authorized to work for ANY employer in the U.S. We are unable to sponsor or take over sponsorship of an employment Visa at this time.
What this job looks like in the OC market
Pay check. This job lists about $37,731 a year (the midpoint of its posted range). That's below the $64,958 median for Other jobs posted in Orange County right now.
About Huntington Beach. About 8,679 OCEAN professionals live or work in Huntington Beach. 46.5% are VP level or above, and the biggest industry is marketing and advertising. There are 275 open jobs in Huntington Beach on the board today. See all Huntington Beach jobs.
More at Cambro Manufacturing. Cambro Manufacturing has 47 open jobs in Orange County, #40 of 402 employers on the board. Other openings: Process Technician II · Mold Tool Tech I · ERP Project Manager · TEMP to F/T – Production Machine Operator I. See Cambro Manufacturing's hiring profile.
Meet people who hire here. A lot of OC hires still start with an introduction. OCEAN's monthly networking mixers and its free OCEAN Connect introductions put you in the room with people at companies like this one.
OCEAN Job Board data, updated daily from live postings. Member figures come from OCEAN's State of OC Business Networking 2026 report and are city-level totals only. How our data works.
Apply for this Job
This employer takes applications on their own website. The button opens it in a new tab.
Apply on Cambro Manufacturing's Site →Similar Jobs


- Senior Custodian/Utility Worker (Swing Shift)
Rancho Santiago Community College District · Santa Ana, CA
Similar Jobs
Get Jobs Like This by Email
Working in Huntington Beach
Huntington Beach is known for the beach, but the job market here is bigger than tourism. Boeing has a long-running campus in the city focused on space and defense work, and the industrial areas near Bolsa, Gothard, and the 405 hold hundreds of manufacturers, machine shops, and distributors. That makes HB one of the better OC cities for engineering, skilled trades, and production roles.
Before You Apply
Apply through the button above, and keep your resume tailored to the keywords in the posting. Check the posted pay range against similar Orange County roles, and look up the drive time at rush hour before you commit. Want an edge? OCEAN has been connecting Orange County professionals since 2007, and a conversation at an OCEAN mixer can put you in front of the people who hire.
Keep looking: All jobs in Huntington Beach · Career advice