Website Morse Micro
Morse Micro is at the forefront of next-generation Wi-Fi technology, specializing in Wi-Fi HaLow solutions that offer extended range, lower power consumption, and enhanced penetration. Our innovative chipset applications are designed to revolutionize connectivity for a variety of applications, including IoT, smart home, and industrial automation.
Job Summary:
Morse Micro is seeking a Product Quality Engineer to join the Failure Analysis (FA) lab at the Irvine site and grow into serving as a point of contact between customers, Field Application Engineers (FAEs), and Sydney-based engineering teams (Design, Systems, Radio, DVT, Firmware). All customer-returned defective units are received, triaged, and investigated at Irvine. This is an early-career role: you’ll be mentored by senior FA and quality engineers in Irvine and Sydney as you build toward full ownership of the lab and customer relationships. The candidate must be capable of hands-on module-level RF testing and failure triage, translate findings into clear FA reports, and collaborate with senior engineers to drive investigations to closure through disciplined cross-time zone coordination with remote engineering teams.
Early Career – New Grad or 2–3 Years Experience
Key Responsibilities
Hands-On FA Lab Execution
-
Receive, log, and maintain chain-of-custody for all customer-returned units (bare modules and end-devices); manage sample tracking from receipt through investigation completion. Units are retained at Morse Micro after FA.
-
Operate the Irvine production lab (LitePoint IQxel + FW) to run full Tx/Rx RF test suites on FA units measuring Tx power, EVM, SEM, PER, and frequency error across MCS/BW/frequency combinations, and flash firmware branches from the Systems/Radio teams to execute structured before/after corrective action verification.
-
Perform systematic multi-unit failure triage using the module test jig: power-on behavior assessment, chip serial logging, failure mode classification, and Jira ticket creation.
-
Conduct component-level fault isolation as needed to isolate whether failures originate at the chip or PCB level, with support from senior engineers on complex cases.
Customer Communication & FA Report Delivery
-
Support customer-facing communication for FA cases, acknowledging receipt, setting timelines, and providing data-backed status updates throughout the investigation lifecycle, growing into independent ownership of this over time.
-
Prepare and issue FA Reports (FARs) to customers (with senior review initially), technically accurate, clearly communicating root cause, corrective action, and verification evidence.
-
Respond to FAE and customer technical inquiries, translating ongoing lab findings into clear, timely communication appropriate for both technical and non-technical contacts.
Cross-Time Zone Coordination with Engineering Teams
-
Work alongside senior engineers as an Irvine-side technical liaison to Design, Systems, Radio, DVT, and Firmware teams, translating lab findings into structured technical briefs and working with FAEs to provide full customer application context that remote engineers can act on asynchronously.
-
Maintain Jira FA tickets with complete technical details, test configurations, firmware versions, BCF files, per-unit results, and failure evidence so remote teams can pick up full context without a live handoff.
-
Support firmware branch requests, root cause assignments, and corrective action commits; follow up proactively to prevent stalls, with increasing independence as you gain experience.
-
Facilitate cross-site FA review calls (initially alongside a senior engineer): preparing agendas, presenting lab findings, capturing action items, and tracking commitments to closure.
Investigation Documentation & Reporting
-
Document all lab test procedures, results, and configurations in Confluence, ensuring investigations are fully reproducible, auditable, and accessible to remote engineering teams.
-
Prepare internal FA summary reports covering failure pareto, repeat failure patterns, and corrective action verification results for engineering review and management visibility.
Qualifications Required
-
Hands-on RF production test experience (or equivalent academic/lab/thesis experience) operating LitePoint IQxel or equivalent, running Tx/Rx test suites, flashing firmware builds, configuring BCF/test region settings, and executing before/after comparisons for corrective action verification.
-
Understanding of or exposure to module-level failure triage concepts: power-on jig assessment, chip serial logging, multi-category failure classification, and Jira-based tracking with engineering team routing.
-
Willingness and aptitude to grow into owning customer FA investigations end-to-end, from unit receipt through root cause, corrective action verification, and FA Report delivery.
-
Strong technical writing skills: clear customer-facing FA reports and structured internal investigation documents.
-
Effective cross-time zone communication; interest in or experience working with distributed engineering teams, with a disciplined async-first, Jira/Confluence documentation approach.
-
Education: Bachelor’s degree in electrical engineering, RF/Microwave Engineering, or a related field with 2–3 years of relevant experience; OR a Master’s degree in Electrical Engineering, RF/Microwave Engineering, Wireless Communications, or a related field with graduate coursework or research in RF circuit design, antenna theory, wireless systems, or analog IC design.
Preferred
-
Familiarity with Wi-Fi HaLow (IEEE 802.11ah), Wi-Fi, or similar RF/wireless semiconductor products e.g., through coursework in RF/microwave circuits, antenna theory, wireless communications, analog IC design, electromagnetics, or digital signal processing sufficient to understand customer failure context and configure a basic test network for reproduction.
-
Experience with MFT (Manufacturing Firmware Test) or similar production test software for module-level test execution and data collection.
-
Experience in a fabless semiconductor company with OSAT-based manufacturing and a global customer base.
Who we are:
Morse Micro is Australia’s largest semiconductor company building Wi-Fi HaLow (802.11ah) chips for the Internet of Things (IoT). We are a team of wireless experts that love to work hard, innovate & invent. Together, we are building the world’s lowest power Wi-Fi technology that will enable billions of IoT devices to connect securely to the internet. We are a global team with offices in Sydney, Picton & Melbourne (Australia), Irvine & San Jose (USA), Bangalore (India), Cambridge (UK), Hangzhou & Shenzen (China), Taipei (Taiwan) and Tokyo (Japan).
What this job looks like in the OC market
Pay check. This posting doesn't list pay. For comparison, Engineering jobs in Orange County list a median of $130,500 a year, and the middle half pay $94,400 to $165,000. Ask about the range early.
About Irvine. About 48,905 OCEAN professionals live or work in Irvine. 46.5% are VP level or above, and the biggest industry is medical devices. There are 1,839 open jobs in Irvine on the board today. See all Irvine jobs.
More at Morse Micro. Morse Micro has 2 open jobs in Orange County, #267 of 402 employers on the board. Other openings: Senior Field Application Engineer.
Meet people who hire here. A lot of OC hires still start with an introduction. OCEAN's monthly networking mixers and its free OCEAN Connect introductions put you in the room with people at companies like this one.
OCEAN Job Board data, updated daily from live postings. Member figures come from OCEAN's State of OC Business Networking 2026 report and are city-level totals only. How our data works.
Apply for this Job
This employer takes applications on their own website. The button opens it in a new tab.
Apply on Morse Micro's Site →Similar Jobs


- Principal Quality Engineer, Advanced Catheters & Extrusions
Edwards Lifesciences · Irvine, CA · $121,000 - $171,000 per year
Similar Jobs
Get Jobs Like This by Email
Working in Irvine
Irvine runs on a few big job clusters. The Irvine Business Complex next to John Wayne Airport is packed with finance, accounting, insurance, and law offices. The Irvine Spectrum area is home to tech, gaming, and automotive companies, including Blizzard Entertainment, Kia America, and Mazda North American Operations. Medical device makers like Edwards Lifesciences and Masimo are here too, and UC Irvine is one of the largest employers in the county.
Before You Apply
Apply through the button above, and keep your resume tailored to the keywords in the posting. Check the posted pay range against similar Orange County roles, and look up the drive time at rush hour before you commit. Want an edge? OCEAN has been connecting Orange County professionals since 2007, and a conversation at an OCEAN mixer can put you in front of the people who hire.
Keep looking: All jobs in Irvine · Engineering Jobs in Irvine, CA · Engineering Jobs in Orange County · Career advice